What is in your interval data?
Drop in a year of utility interval data and see it the way an analyst does: the whole year at once, the night floor, the weekends, the peaks, and what running outside your hours could be costing. It all happens in your browser.
Or drop the file on this box. A CSV or a Green Button XML file, hourly or 15-minute, up to three years. It is read here, in your browser. Nothing is uploaded. Not sure how to get one? How to ask your utility for interval data.
Your year
Each column is a day, each row an hour, midnight at the top. Bright bands at night, weekends that look like weekdays and single bright spikes are the things worth asking about.
- Night floor
- –
- A weekend day
- –
- Peak
- –
- Highest month’s peak
- –
What the building draws between 1 and 4 am, with nobody in it. MET-01 asks whether that is too high for this building.
of a weekday’s energy. Near 100% in a building that closes at weekends is the question MET-04 answers.
Load factor –.
above a typical month. At a typical $12/kW demand charge that one month cost – more. MET-05 finds the hour it happened.
Outside your occupied hours
– a year above the night floor, at most
This is the after-hours arithmetic published on the MET-03 page, fed from your file: average load above the night floor, times the hours a week the building is scheduled empty. It is an upper bound: start-up, cleaning and refrigeration are in there too. Change the hours above to match your building.
What this first look cannot tell you
It cannot tell which of this is a fault, what is causing it, or what it costs at your actual tariff. Energy Agent runs 96 engineering rules and machine-learning models over the same file, with your weather and schedule, and an engineer stands behind the result. Your first building is free.
Thanks. Your message is in.
A Pelorus engineer will reply within one business day and ask for the file.
A first look, not an analysis: descriptive arithmetic you can check by hand, with the one dollar figure coming from the after-hours estimator published on this site. Which findings are real, what causes them and what they cost at your tariff is what Energy Agent and a Pelorus engineer work out.
Your first building is free.
Send twelve months of interval data, a BAS trend export, or just the bills. You get a screening-level report of what the building is wasting, what that is worth at your tariff, and what to do first. One building per organisation, no sensors, no installation, no commitment.